Manual For Lucas Sr1 Magneto
If your Classic Motorcycle Magneto has an Automatic Timing Device (ATD), we. If your Magneto is currently Manual Advance / Retard, but is designed to take. Universal EasyCap for Lucas SR1 The Universal EasyCap can be mounted in a number of places in the Lucas SR1 rotating-magnet magneto. In this example, it will be mounted on the screw that can also serve as the cut-out terminal.
Manual For Lucas Sr1 Magneto Timing
Manual For Lucas Sr1 Magneto Points
Hi Bill, I believe Lucas spec for a factory RS1 coil should be 7000oms? Set your multimeter at 1xk then test between hi tension contact(top) & both of the low tension wires, One is earth the other is live to condencer, you should get a reading. Your low tension reading across the bottom 2 wires should be.1.2 I think? To be certin your coil is performing correctly,it needs to be put on a coil & condencer test bench, this will bring it up to working temperature, check the series curcuit & the condencer performance. I have got away with lower reading coils (4500oms) with RS1's on my engines but I don't work them all day every day either, only evey now & then at rallies. I suggest you replace the condenser with a Bosch type CL 103(land rover defender 3.5 V8) just to be sure.